Brand Planet
Manufacturer Planet Technology
Model POE E202
Product Type Gigabit PoE Extender
Application PoE and Gigabit Ethernet Extension
Total RJ45 Ports 3
PoE Input Ports 1
PoE Output Ports 2
Network Interface 10 100 1000BASE T Gigabit RJ45
Input PoE Standard IEEE 802.3at PoE Plus
Output PoE Standards IEEE 802.3af and IEEE 802.3at
PoE Input Power Up to 30.8W
PoE Output Power Up to 25W Per Port
PoE Output Devices Up to 2 Compatible Powered Devices
PoE Input Type End Span and Mid Span PD
PoE Output Type End Span PSE
Maximum Additional Extension Distance 100M
Maximum Device Distance Up to 200M from Compatible PoE Source
Data Rate 10 100 1000Mbps
Switching Fabric 6Gbps
Switch Throughput 4.46Mpps
MAC Address Table 2K
Data Buffer 2Mbits
Jumbo Frame 10KB
Switch Architecture Store and Forward
Auto Negotiation Supported
Auto MDI MDI X Supported
VLAN Transparency IEEE 802.1Q
Flow Control IEEE 802.3x
External Power Adapter Required No
Installation Plug and Play
Mounting Wall Mountable
Housing Metal
Dimensions 140 x 76.7 x 27.7mm
Weight 258g
Operating Temperature 0 to 50 Degrees Celsius
Operating Humidity 5 to 95 Percent Non Condensing
Designed to extend both Gigabit Ethernet data and PoE power beyond the conventional 100 meter Ethernet distance limitation for compatible network installations
Features one 10 100 1000BASE T RJ45 data and power input port and two 10 100 1000BASE T RJ45 data and power output ports
The single IEEE 802.3at PoE Plus input can receive up to 30.8 watts of PoE power from a compatible PoE Plus source
Two output ports support IEEE 802.3af and IEEE 802.3at PoE for connecting and powering up to two compatible powered devices
Each PoE output port can provide up to 25 watts depending on available input power connected equipment cable distance and operating conditions
Extends Ethernet data and PoE power for an additional 100 meters over compatible Cat 5 Cat 5e or Cat 6 network cabling
Allows compatible powered devices to be positioned up to approximately 200 meters from the original PoE source using appropriate cabling and installation conditions
Point to multipoint design makes it possible to extend one PoE Plus connection into two remote PoE connections without installing additional Ethernet cabling from the original network switch
Suitable for compatible PoE IP cameras wireless access points VoIP phones access control equipment and other IEEE 802.3af or IEEE 802.3at powered devices
Provides Gigabit Ethernet speeds of 10 100 1000Mbps for reliable high speed network data transmission
Hardware based auto negotiation and Auto MDI MDI X provide convenient connectivity with compatible Ethernet equipment
Supports a 2K MAC address table and 2Mbit data buffer for efficient network traffic handling
6Gbps switching fabric and 4.46Mpps switching throughput support efficient forwarding across connected Gigabit devices
Supports jumbo frames up to 10KB for compatible high volume Ethernet data applications
IEEE 802.1Q VLAN transparency allows VLAN tagged traffic to pass through the extender without requiring additional configuration
Store and Forward switching architecture helps provide reliable Ethernet packet transmission
Automatically detects compatible powered devices before supplying PoE power to help provide safe network deployment
Powered directly through the incoming IEEE 802.3at PoE Plus connection and does not require a separate external power adapter
Plug and Play design requires no software programming or complicated network configuration
Metal housing provides durable construction suitable for professional networking and surveillance installations
Wall mountable design provides flexible installation around network cabinets surveillance areas offices and other deployment locations
Suitable for IP surveillance wireless networking VoIP access control campuses offices warehouses and other applications requiring extended PoE connectivity
Provides a practical solution for adding two remote PoE connections while extending Gigabit Ethernet data and power beyond the standard Ethernet distance limit